| BEARINGS & BUSHINGS | |||
 |
31227 | THRUST BEARING | $49.50 |
| This is a Double Row 12 balls per row 24 total- Aggressor has a second grind tolerance called pre-clearance put on the thrust bearings to support our customers demand for a higher frontal load or RPM requirements. We have tried them all and no bearing meets the demands our builders put these under. | |||
 |
31228 | THRUST BEARING-with SNAP RING | $68.60 |
| Same Bearing as 31227 except unit has been ground for insert of Snap Ring- Dominator -Jacuzzi | |||
| 17006 | THRUST BEARING-7000 JR. DRIVE | $44.00 | |
| Aggressor 7000 JR | |||
 |
31261 | Bowl Bushings (Bearings)- Most Common | $7.85 |
| Press fit Bushings for most Bowls-Agg.Berk/A/T | |||
| 31262 | Bowl Bushings (Bearings)- Dominator | $7.95 | |
| Press fit Bushings for Bowl- Same Bore Diameter as 31261 bushing except 1/4" longer then 31261-(Can be Used in some to increase shaft ride surface) | |||
 |
17005 | Press Fit-Teflon Coated | $7.95 |
| Bowl Bushings Aggressor 7000 JR DRIVE | |||
 |
31234 | Nyliner Plastic Bushings for Pins -3/4" | $1.80 |
| Plastic Pin Bushings | |||
| 31240 | Nyliner Plastic Bushings for Pins -3/8" | $1.72 | |
| Plastic Pin Bushings | |||
| 31234 | Nyliner Plastic Bushings for Pins -1/2" | $1.72 | |
| Plastic Pin Bushings | |||
 |
13027 | Bowl Conversion Kit- Requires Bowl Re-Bore- | $87.80 |
| Kit is complete with Housing -(2) bowl bushings press fit, J.M. Seal with Retainer Snap Ring-Bowl End Cap with grease lube fitting to convert to grease lube bowl system. | |||
6960 Aragon Cir. #2 Buena Park, Ca. 90620