| BOWLS | |||
| Aggressor's Bowls are designed to minimize harmonics (a Flow Disrupter) while providing specific flow volumes to match the Impellers output demand. Aggressor Bowls typically improve both the hole shot and carry this through the entire performance band. The longer vane structure provides both a decrease in internal head pressure while providing optimum flow control. All Aggressor Bowls release water straight into the nozzle system and not into the side walls which causes turbulent roll within the nozzle system. Below we show you why our bowls have such fine detail and finish to further complement our flow design. | |||
 Cutaway Bowl Core before Cast |
Bowls are pre-machined & tapped for the optional Bowl Stuffer. Double Seals with retainer Snap Ring. Grease Lube System-Internal broach's to lubricate Bushings | ||
 |
13010 | 9 VANE BOWL ASSEMBLY | $755.00 |
| Today's standard for overall performance. Has a flow Rate of 556 C/F/M setting a new standard for todays Jet Pumps. Hi Flow with internal details beyond the Industry. | |||
| 9 VANE BOWL ASSEMBLY with STUFFER | |||
| 13010-S | Same as 9 Vane except with Stuffer | $825.00 | |
 |
13011 | 11 VANE BOWL ASSEMBLY | $810.00 |
| This bowl was designed for High Horsepower and performs the function of Top Eliminator. The Bowl vacates at a rate of 586 C/F/M keeping the demand on the Impeller for load. Note: 11 Vane is a ET type bowl and not a overall type bowl | |||
| 13011-S | 11 VANE BOWL ASSEMBLY with STUFFER | $880.00 | |
| Same as11 Vane except with Stuffer | |||
 |
13028 | 7 VANE BOWL ASSEMBLY | $755.00 |
| Bowl has a flow rate of 498 C/F/M. Usage has been under 360 HP. Additional applications have been to generate head pressure for lift of Heavy Boats Etc. | |||
| 13028 | 7 VANE BOWL ASSEMBLY with STUFFER | $825.00 | |
| Same as 7 Vane except with Stuffer | |||
| -P | POLISHED BOWLS - ADD | $45.00 | |
 |
1036 | BOWL STUFFER- | $87.50 |
| Fits up/in behind the Impeller to Shut down any water shaft sling and quick pressure the Bowl.-Very Functional-Drops right in Aggressor & Lock Tite | |||
 |
1072 | Bowl Cradle -Tall | $79.00 |
| Machined from Billet includes Shims | |||
| 1073 | Bowl Cradle - Short | $79.00 | |
| Machined from Billet includes Shims | |||
 |
1128 | Air Bleeder Valve | $49.00 |
| Gets the Air Out Quick from the suction and Bowl. | |||
 |
2016 | Billet Bowl Cap with Grease Fitting | $28.40 |
| Used on all Aggressor Bowls- Can also be used to convert other Bowls | |||
 |
2015 | Billet Bowl Cap- Tapered | $24.95 |
| For replacement std Cap | |||
 |
13027 | Bowl Rebuild/Conversion Kit- Requires Re-Bore- | $87.50 |
| Kit is complete with Housing -(2) bowl bushings press fit, J.M. Seal with Retainer Snap Ring-Bowl End Cap with grease lube fitting to convert to grease lube bowl system. | |||
 |
Seal Retainer Snap Ring-Agg. Bowl | $1.60 | |
 |
31239 | Bowl Seal-Most Common | $11.65 |
| J.M. Clipper Seal -BEST-(Pat.SealSurface) | |||
 |
31239-1 | Bowl Seal-Most Common-Import Seal | $7.98 |
| Import- Poly Case Clipper Type | |||
 |
31291 | Dynimite Red Grease-by Husky | $9.30 |
| A sound Hi Temp Marine Grease for your pump. | |||
6960 Aragon Cir. #2 Buena Park, Ca. 90620