| DROOPS - STRAIGHT NOZZLE EXTENDER -NOZZLE HOUSING | |||
| Droop's lower the thrust line of the jet prior to the nozzle exit. This ceates a Tail Lift on most boats, which in turn causes the hull to lift and run higher in the water. It is this condition that decreases the wetted running surface of the hull and typically shows a increasein MPH. Compensation of nozzle angle in relation to the amountof drop x length is provided for in the nozzle exit angle. | |||
 |
STD. DROOP- | ||
| 1126 | 1" drop of thrust line, 7 1/2 Degrees up Angle. Droop has straightner bar internal to stop any tumble and roll action within. | $289.00 | |
| 1126-P | POLISHED | $324.00 | |
 |
SHORT DROOP | ||
| 1125 | 1" drop, 3 1/2 degrees up angle. Droop was developed for tunnels and those hulls which still want lift, yet have a problem in dragging the hardware in the water on a standard length droop. | $289.00 | |
| 1125-P | POLISHED | $324.00 | |
 |
1127 | Droop JR Drive | $280.00 |
 |
NOZZLE HOUSING-STD. Fits Most | ||
| 1048 | Fits Most -Non Restrictive Passage for Volumn | $238.00 | |
| 1048-P | Polished- | $261.00 | |
| EXTENDED STRAIGHT NOZZLE HOUSING | |||
| 1047 | This one we released in 1999 and now re-releasing Extends nozzle location 6 1/2" vs Std Nozzle @ 3 1/4". Can be further adapted to Wedge's to gain angle desired. | $295.00 | |
| DROOPS - SUPPORT PARTS | |||
 |
6" Steering Extension- | ||
| 2067-1 | Billet Machined-(Ext is Measured Mount Hole | $38.90 | |
| 8" Steering Extension | |||
| 2067-2 | Billet Machined-(Ext is Measured Mount Hole to Hole) | $42.00 | |
 |
Adjustable Extension | ||
| 1058 | Can be cut to any Length from short to 16" | $24.50 | |
 |
Droop Stud Kit | ||
| 13007 | 8 Threaded Studs with washers and Nuts for attachment. | $22.90 | |
 |
Steering Clevis | ||
| 31280 | Steering Clevis lets you adjust for angles | $22.10 | |
6960 Aragon Cir. #2 Buena Park, Ca. 90620