| IMPELLERS | |||
 |
550300 | Aluminum Impellers | |
| Aggressor is known for the most aggressive Impeller's on the market. Our Aluminum Impeller's are Heat Treated/ Vane Cut/Receive a Full Detail Balanced and then receive a Hard Black Anodize to further insure the finest. Efficient Impeller on the market. | |||
| 550300-0 | "AAA" Economy Cut | $310.00 | |
| 550300-1 | "AA" Cut | $310.00 | |
| 550300-2 | "A"Cut | $310.00 | |
| 550300-3 | "B"Cut | $310.00 | |
| 550300-4 | "C" Cut | $310.00 | |
| Specialty Cuts | $310.00 | ||
 |
550400 | MAJOR MAG. BRONZE | |
| This is the Bad Boy that Retired the Stainless Steel Impeller. The Records Keep Coming, In every Class, form the everyday 550HP Lake Racer to the Big Blown Guy's- Our Alloy combination is the secret giving us as very high or higher tinsile strength then most all stainless steel Impellers. It's the Uncontested winner hands down. Exceptional is the outcome on our Major Mag.Impellers Eight years of constant development to arrive at the tinsile strength and final finish. Its made believers of Racers, Buliders and Jet Owners across the country. NOTE: All Vanes Are Index Machine Cut | |||
| 550400-0 | "AAA" Economy Cut | $698.00 | |
| 550400-1 | "AA" Cut | $698.00 | |
| 550400-2 | "A"Cut | $698.00 | |
| 550400-3 | "B"Cut | $698.00 | |
| 330400-4 | "C" Cut | $ 698.00 | |
| Specialty Cuts | $45.00 | ||
 |
550250 | STAINLESS STEEL | |
| With Major Mag. Filling 98% of this market's requirement -The 17-4 Alloy was selected in a mild Heat Treated stage to carry the honor of Aggressors Top OF The Line. Full detail and Index cut vanes makes this the very best a Impeller can be. Again we recommend for Top Fuel (See Major Mag. Alloy for Most All Applications- Its your Money) NOTE: All Vanes Are Index Machine Cut | |||
| 550250-0 | "AAA" Economy Cut | $1,198.00 | |
| 550250-1 | "AA" Cut | $1,198.00 | |
| 550250-2 | "A"Cut | $1,198.00 | |
| 550250-3 | "B"Cut | $1,198.00 | |
| 550250-4 | "C" Cut | $1,198.00 | |
| Specialty Cuts | $45.00 | ||
 |
130XX | IMPELLER SHIM KIT | |
| NOTE: A Good Rule of Thumb when changing over to Aggressor Impellers. Due to the Impellers aggressive load and flow volumns. Aggressor and | |||
 |
Axial Impeller( 2 stage pre-load Impeller) | $389.00 | |
| A way to step up your take off for Hole Shot. Can also cure problem intake loading conditions. Can produce high speed cavatation | |||
 |
Impeller Key-S/S | $3.50 | |
| Key is cut and ground for fit -Stainless Steel | |||
| CHANGING OVER TO AGGRESSOR IMPELLER | |||
| We recommend you drop 1 full cut size if you want your RPMs to remain in the same range. Your Local Dealer will Help You or call us. | |||
6960 Aragon Cir. #2 Buena Park, Ca. 90620