| NOZZLES & SYSTEMS |
 |
1044 |
Forward/ Reverse -STD Nozzle -Common |
$255.00 |
| |
Unit fits most-Include Over Bore Internal Dia and Insert Choke Your Choice |
| NEW |
 |
|
1045 |
RACE NOZZLE- (NO REVERSE) |
$265.00 |
| |
Designed for the Drag Racer-unit carry's a over bore to the Insert choke Dia.Choice of Choke Size. |
| SEE Trim Diverter- See Trim Diverter for Parts |
 |
1049 |
Reverse Bucket- (Facing Transom-Right Hand) |
$210.00 |
| 1050 |
Reverse Bucket- (Facing Transom-Left Hand) |
$210.00 |
 |
31280 |
Steering Clamp (Swivel) |
$23.00 |
| |
Stainless Steel |
 |
13020 |
Steering Tube Assy- With Grease Lube (shown) |
$34.50 |
| |
Unit has machined billet fitting with grease fitting and shaft wiper seal |
| 13020-1 |
Steering Tube Assy- with rubber end stop (not shown) |
$32.00 |
| |
Unit has machined billet fitting with rubber stop on end |
 |
2038 |
Steering Tube Replacement |
$21.00 |
 |
2039 |
Steering Tube Nut |
$9.85 |
| |
Billet Machined Anodized |
 |
2040 |
Steering Tube -Gromit Seal |
$2.80 |
| |
Rubber |
 |
2041 |
Steering Tube End Wiper Cap |
$14.96 |
| |
Billet Machined with Internal Rubber Wiper & Grease Fitting |
 |
31270 |
Swivel Steering Tube Assy- |
$69.80 |
| |
Nylon Swivel Ball-Mounted between Stainless Plates allows the Steering tube far greater rotation angle. |
 |
31281 |
Nylon Steering Balls- Replacement |
$9.51 |
 |
2067-2 |
Steering Extension 6"(overall 8") |
$38.92 |
| |
Billet Machined-6" is measured between the holes |
| 2067-1 |
Steering Extension 8"(overall 10") |
$42.00 |
| |
Billet Machined-8" is measured between the holes |
 |
1058 |
Aggressor Cast Steering Extension- Cut any size |
$25.00 |
 |
2036 |
Cable Reducer |
$30.44 |
| |
43 TO 33 |
 |
|
INSERT CHOKES-Agg Nozzles |
| 2010-8 |
3.250 |
$46.80 |
| 2010-7 |
3.187 |
$46.80 |
| 2010-9 |
3.125 Choke - Shipped as standard if unspecified |
$46.80 |
| 2010-6 |
3.090 |
$46.80 |
| 2010-5 |
3.060 |
$46.80 |
| 2010-1 |
2.750 JR Drive Standard |
$46.80 |
| 2010-C |
Custom Dia. Bore |
$55.00 |
